PS2 Joystick Keypad RF 433MHz Wireless Joystick Game Remote Controller Module Transceiver Kit for Smart Car / 4-axis Aircraft

Note: If you want to place the bulk order that the stock is not enough, please contact with us.

You can also buyRF 315MHz Wireless Joystick Game Remote Controller Transceiver Kit here (Link) :

Description

This is wireless joystick remote kit that include a wireless joystick control board and a RF 433MHz receiver module.

Onboard one game joystick and 4 buttons. The shape of the PCB is suitable for your hands.

There is ATmega8A-AU chip onboard that has firmware. It will get position information of the thumb joystick and buttons and then send it out via RF transmitter onboard.

Every time the joystick change or one button is pressed or released, the MCU will send the information out.

NOTE1: This product does not include the battery, please know.

NOTE2: For the power for the remote control, you can use 3.7V lithium battery with XH2.54 connector. And You can refer to the red and black line order from the follow reference photo:

Features:

- Onboard MCU: ATmega8A

- Working voltage: 3-5.3V

- Working current: 42mA(max)

- Buttons: with beautiful color key cap and pins are all float, so you should pull up it in your MCU(Active low level output).

- Thumb joystick: great to control a smart car or 4-axis Aircraft.

- Onboard power supply socket: 2.54mm pitch

- Onboard power switch: turn on or turn off the power.

- Onboard PROGRAM header: burn bootloader and firmware

- Onboard transmitter: large power 433MHz transmitter module

- Transfer rate: 2000bps

- Transmission distance: When supply power is 5V, the open area transmission distance can be increased to 100 meters.

- Positioning hole diameter: 3.2mm

- Great for smart car, smart Aircraft projects

About receiver module:

- Compatible for Arduino

- Library: VirtualWire

- Operating voltage: 3 - 5.3VDC

- Working frequency: 433MHz

- Working Current: 2mA

- Sensitivity: -110db

- Transfer rate: 2000bps

- Antenna: Onboard 433MHz dedicated PCB Antenna

- Great for DIY project.

Photos

Part List (Schematics and program can be sent via e-mail,Please contact us)

1 x Remote control

1 x Receiver module